Select the IR port you want to send the command from. These ports are labelled on your module.
Select the format you wish to send the IR data in.
Enter the IR data to send in the format specified.
When you have MEM or DBA selected as the format, an additional
Build (A in the image below) button will show up. This allows you to build a command either from the onboard database or from an IR file loaded onto the device.
Use the IR data builder to easily craft a command from the built in IR database to send to the selected IR port on your device.
When you click
OK you will see that the Data field is now. populated with a command.
Use the IR data builder to easily craft a command from any IR files you have uploaded to the device.
Click this button to send the command immediately from the selected IR port.