CommandFusion Wiki

Documentation Resources

User Tools

Site Tools


Sidebar

hardware:device-resetting

Device Resetting

Soft Reset

Simply press and release the reset button on any unit to force it to restart. This is essentially the same as power cycling the unit.

Factory Reset

There may come times when you need to revert a device to the settings it has out of the factory. Doing this will erase any settings that have previously been applied.

To erase all settings and return the unit to factory default settings do the following:

  1. Press and hold both the SETUP and RESET buttons simultaneously for 1 second
  2. Release the RESET button, but continue holding the SETUP button until the power LED begins to flash quickly
  3. Release the SETUP button and the device will reboot with factory settings
hardware/device-resetting.txt · Last modified: 2012/10/14 20:07 by aaron