You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate tool.
====== Input/Output (IO) CFLink Protocol ======
The following documentation describes the CFLink protocol for controlling IO ports on any device with IO's.\\
This includes IO modules and standalone dev... ''STA'' (Status) query returns the status of all IO ports in a single module.
=== Data ===
<sxh cfli... DATA>[F5][F5]
</sxh>
* **<IODATA>** = For each IO port in the module, the port status is returned i
{{:hardware:cf-mini:cf-mini-configuration:cf_mini_io_tab.png?nolink|}}
This page is under constructio... ==
* **Enabled** = Enable or disable the entire IO functionality of the CF Mini. Disabling is useful... red.
* **Report Interval** = How frequently the IO port status is reported on the bus. Use a value o... lue above zero to force the CF Mini to report the IO port status at frequent intervals automatically.
luding (but not limited to):
* ''IOX'' is for IO port notifications (modules or onboard IO ports).... ue>
// Retreive the notification settings for all IO modules in a MOD4 on CFLink ID [04]
> [F2][04][F3... F4][F5][F5]
// Reply, notification config for any IO modules in the MOD4
< [F2][04][F3]RIOXTGT[F4]07:2... he notification targets for the status command of IO modules in a MOD4 on CFLink ID [04]
// Notificati
put/Output ====
The top left connector contains 4 IO ports. Each port can be configured as either:
... - Port 4 Input
- Port 4 Ground
{{:hardware:io_externalrelay.svg|}}
==== Relay ====
The top rig... evice-resetting|Device Resetting Page]].
{{tag>hardware cf_mini cflink ir io relay rs232 serial com}}
mmander_port_testing_ir.png?direct&600 |}}
\\
For IO ports, we can see their current input or output s... r:quick-start-guide:system_commander_port_testing_io.png?direct&600 |}}\\
[[http://www.youtube.com/wat
ming data notifications.
* ''IOX'' - Used for IO port read state changes (dry contacts, resistance... nput read state changes.
* ''IOX'' - Used for IO module port read state changes (dry contacts, res