A video version of this quick start guide is available here.

When you first get your CommandFusion hardware, the first thing you should do is check to see if your devices have the latest firmware installed.

We can check the firmware version of our device by selecting it in the device tree. Under the general tab, we can see the basic details of our hardware. CFLink ID, Serial Number, Firmware version and Mac Address if applicable.
So take note of the firmware version listed, then go to firmware.commandfusion.com and select the appropriate device. This will take you to another page which lists the current firmware number. If this number is larger to that on your hardware, then its time to update it.

To download the firmware, click on .ZIP file, then click RAW. The firmware will then download to your computer. You will then need to unzip it before it can be used.

We will assume for this video that our hardware has all the latest firmware installed. For more details on how to update firmware, see our Firmware Updating page.