CommandFusion Wiki

Documentation Resources

User Tools

Site Tools



This is an old revision of the document!

IR Blaster - IR Rules Guide/Tutorial

Under Construction - This Page is Not Completed

IR Blaster Overview

The CommandFusion IR Blaster designed to literally blast out IR in many directions at once to flood a room with IR.

This can be used to control a number of devices at once, without needing to run an individual wired emitter to each unit.

The IR Blaster has 12 internal emitters at the front and sides, giving it an output of 270 degrees. On top of that, it also has a 3.5mm output to connect an external wired IR emitter if required. It also has an IR receiver on board, as well as a 3.5mm IR receiver input.

hardware/quick-start/ir-blaster-ir-rules.1379051236.txt.gz · Last modified: 2013/09/13 05:47 by aaron