CommandFusion Wiki

Documentation Resources

User Tools

Site Tools


Sidebar

hardware:cflink:default-cflink-ids

This is an old revision of the document!


Default CFLink IDs

The following documentation outlines the default CFLink ID's for the current CommandFusion hardware.
These are the ID's that each product ships with out of the factory.
You can of course change this ID later, as each product on the CFLink bus must have a unique CFLink ID.

  • [02] - [0F] = Ethernet Devices
    • [02] = LANBridge
  • [10] - [1F] = Modular Devices
    • [10] = MOD4
    • [11] = DIN-MOD4
  • [20] - [2F] = Standalone Devices
    • [20] = CFMini
    • [21] = IRBlaster
    • [22] = SW16

Note: ID's are represented in hex format, so [20] = hex byte 0x20, which equals decimal ID value of 32. Throughout the protocol all CFLink ID's are referred to in hex format (or ascii representation of hex). The decimal value is not needed anywhere in the protocol.

hardware/cflink/default-cflink-ids.1344574173.txt.gz · Last modified: 2012/08/10 04:49 by aaron