Compact, All-In-One Controller.
Single room solution.
CF Mini is a powerful all-in-one controller. Featuring IR, I/O, Relay and RS232 control, the CF Mini makes a great single room or distributed solution.
IR, I/O, Relays, RS232,
Featuring a variety of control methods in a single box, the CF Mini is perfect for single room installs such as home theatres and boardrooms, as well as distributed systems such as classrooms.
Scalable via CFLink,
expand as needed.
The on-board CFLink BUS means you can link the CF Mini with any other CFLink devices, even multiple CF Minis. CFLink BUS supports over 200 devices, although the maximum system size would depend on how much traffic the system has to cope with.
Combine with LAN Bridge
for ethernet control.
Control all aspects of the CF Mini via Ethernet by linking it up with a LAN Bridge on your CFLink network.
The CF Mini is a powerful, all-in-one controller. It features 8 x IR outputs, 4 x configurable I/O ports, 4 x 30VDC latching relays and one RS232/Program port.
All CFLink devices, including the CF Mini, support a powerful rule triggering engine. This allows you to trigger macros to run when a specific event occurs - such as reading a specific value via the I/O ports, or on incoming data via the RS232 port. Using the rules engine, you can setup basic or complex automation actions.
Link with LAN Bridge
The CF Mini does not feature an Ethernet port. Instead, the CFLink port is used to expand your system with any other CFLink devices. The LAN Bridge is a perfect companion for the CF Mini, for a very affordable single room solution when controlled by a mobile device such as the Apple iPad.
IR Database & Storage
All IR emitting devices in the CommandFusion range include an on-board IR database, with over 500,000 IR codes built in. If the device you want to control doesn't exist in the database, simply use our IR Learner to learn the IR codes and create an IR file ready for storage directly in the IR Blaster's on-board memory.
GalleryHigh res photos in downloads section
Technical SpecificationsSee hardware documentation for more details
|CFLink||Detachable 5-pin 3.81mm terminal block for CFLink BUS|
|COM||6-pin RJ12 female port for RS232 control of devices; or programming mode which allows both programming and external control of the CFLink BUS devices|
|IR 1-8||4 detachable 4-pin 3.5mm spring terminal blocks for infrared emitters|
|I/O 1-4||2 detachable 4-pin 3.5mm spring terminal blocks for GPIO:
- Digital input for dry contact inputs
- Analog input for 0-10 Volts DC read or 0-10k Ohms read,
- Digital output for LED output or external relay control (separate relay power supply required)
|Relay 1-4||2 detachable 4-pin 3.5mm spring terminal blocks for latching relays; rated 1A 30 volts AC/DC|
|MicroSD Slot||Spring-loaded memory expansion slot (card not included)|
|CFLink Power||9-30V DC, 24V DC regulated recommended (power supply is not included)|
|Power Consumption||4W maximum|
|Power Indicator||Blue LED indicates power status|
|CFLink Fault Indicator||Red LED indicates error on CFLink BUS|
|CFLink Activity Indicator||Yellow LED indicates CFLink BUS traffic|
|Setup Button||Setup button used for factory reset|
|Reset Button||Reset button restarts the processor|
|Prog Indicator||Yellow LED indicates RS232 port is used for programming or control of CFLink BUS|
|RS232 Indicator||Yellow LED indicates RS232 port is used for control of RS232 devices|
|Status Indicator||Yellow LED indicates status/activity on any of the CF Mini on-board ports (configurable)|
|Enclosure||Polycarbonate with dark grey matte finish|
|Weight||0.22kg (0.49lbs), Shipping 0.4kg (0.88lbs)|
|Environmental & Regulatory|
|Temperature||5°C to 45°C (41°F to 113°F)|
|Humidity||20% to 85% RH, non-condensing|
|Certification||FCC, CE, C-Tick|
|Warranty||5 years limited warranty|
Downloads & Documentation
CF Mini Quick Reference Guide includes details like pinout diagrams and general connectivity details.
Single page specification sheet.