Hardware

CommandFusion develops a range of hardware products for the automation and control market.

See our typical applications page for information on how CommandFusion products can be implemented.

Getting Started

See this guide in our wiki for details on getting started with your new CommandFusion hardware.

Product Documentation

DIN-MOD4

The DIN-MOD4 features 4 modular bays for populating with our hardware modules. DIN rail mountable.

MOD4

The MOD4 features 4 modular bays for populating with our hardware modules. Rack mountable with the optional rackit.

RACKIT

1RU 19” inch Rack Mounting Tray with locking tabs and cable management for housing 2 units of MOD4.

CF Mini

The CF Mini is a multifunctional miniature controller.

LAN Bridge

The LAN Bridge is an Ethernet and RS232 interface to the CFLink bus

IR Blaster

The IR Blaster features an on-board 270° IR blaster output, as well as a secondary wired emitter output. The IR Blaster also has an on-board and external IR Receiver input for triggering macros via standard remote control functions.

SW16

The SW16 features 16 dry contact inputs, 16 dimmable LED outputs for status indication and 4 dimmable backlight outputs. Connect the SW16 up to a custom or off the shelf keypad to interface it with the CFLink bus.

IR Learner

The IR Learner is a compact USB device for learning IR codes and testing them via the on-board IR blaster output. It can also be used to test codes from our IR database.

IRE-SLIM

The IRE-Slim emitter is an infrared probe designed by custom integrators, for custom integrators. Featuring the thinnest emitting head, mini 3.5mm mono jack, smoothly designed wire gauge step down join and useful accessories.

PS-2420

Switch-mode Regulated 24V DC 2A Power Supply for powering up our series of hardware and devices.

CF Solo

The CommandFusion Solo is an network-enabled multifunction and featured control system with on-board and slot-in modular ports with controls available for IR Learning & Control, RS232/485, relays, dry contact, Ethernet, etc.

CARD-LRY3

A relay plugin card for the Solo controller featuring 3 x 30VDC 1A relays.

CARD-COM4

A serial plugin card for the Solo controller featuring configurable 4 x RS232/422/485 ports.

DIN-RY8-N

This is a 8-channel relay controller with real time load detection, 2-way switching, RS232/RS485 control, dry contact with macros/rules engine for event triggering.

DIN-RY5-N

This is a 5-channel relay controller with real time load detection, 2-way switching, RS232/RS485 control, dry contact with macros/rules engine for event triggering.

Firmware Updates

Follow the firmware update guide for details on updating your hardware to the latest firmware versions.

Warranty

Most CommandFusion hardware includes a 5 year warranty. For more details see our warranty policy.