You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate tool.
====== LAN Bridge CFLink Protocol ======
The following documentation is for the LAN Bridge device CFLink ... ication slots exist on a LAN Bridge:
* ''1'' = CFLink slot
* ''2'' = On-board RS232 slot
* ''3'' = ... ions, can only be enabled/disabled via [[hardware:cflink:lanbridge-cflink-protocol#udb-udp-broadcasting-co... ived, the LAN Bridge will respond with [[hardware:cflink:error-codes#lan-bridge-solo-error-codes|''RLANERR
====== Solo CFLink Protocol ======
The following documentation is for the [[hardware:solo|Solo]] device CFLink protocol messages.\\
Note that the Solo does NOT feature an on-board CFLink port, but it still... Ethernet.
By default, the Solo communicates the CFLink Protocol via:
* TCP port 10207
* UDP port 102... O'' query does not have any associated data.
<sxh cflink; light: true>
> [F2]<ID>[F3]QCFXWHO[F4][F5][F5]
<
==== Common Device Protocol ======
The following CFLink protocol messages are common to all CFLink device... HO'' reply will be automatically broadcast to the CFLink network when a device is powered up or reset. It ... duct code, serial number, application version and CFLink version.
<sxh cflink; light: true>
> [F2]<ID>[F3]... <DEVICE>WHO[F4]<PRODUCTCODE>:<SERIAL#>:<APP_VER>:<CFLINK_VER>:<DATA>[F5][F5]
</sxh>
== Example ==
<sxh cf
====== CFLink Overview - Why Choose CFLink? ======
Since the release of our initial [[http://www.commandfu... st common questions we get is "Why did you create CFLink when Ethernet already exists?"
While the easy me... ieve it was the right choice. We chose to go with CFLink based on our experience in the industry, after ex... for when choosing control hardware.
===== What is CFLink? =====
Firstly, lets take a look at what CFLink a
====== DIN-RY CFLink Protocol ======
The following documentation is for the DIN-RYx-N devices CFLink pro... roperties for each control port on the unit.
<sxh cflink; light: true>
> [F2]<ID>[F3]CCFXSPC[F4]<PORT>:<MO... rates would be 115200 (default) and 38400.
<sxh cflink; light: true>
> [F2][20][F3]CCFXSPC[F4]P04:BUS:11... * 128000
* 256000
* CFL (CFLink Mode) - Messages sent to/from the CFLink Bus, all
====== SW16 CFLink Protocol ======
This document details the CFLink protocol for the SW16 device.
===== ... of all the dry contact inputs.
=== Data ===
<sxh cflink; light: true>
< [F2]<ID>[F3]RSWXSTA[F4]P01:<STATE... f.
* ''1'' = closed, on.
=== Example ===
<sxh cflink; light: true>
// States returned for SW16 on CFLink ID [22]
< [F2][22][F3]RSWXSTA[F4]P01:1|P02:0|P03:0|P04:0|P05:0|P06:0|P07:0|P08:0|P09:0|P10:0|P11:
2 Port Protocol ======
This document defines the CFLink protocol for working with the on-board serial por... ''CFX''.\\
This goes for all commands sent to any CFLink device.\\
However, all //replies/notifications// ... not have any associated data.
=== Reply ===
<sxh cflink; light: true>
< [F2]<ID>[F3]RCFXSPC[F4]<PORT>:<MO... ch returned data parameter.
=== Example ===
<sxh cflink; light: true>
// Query the Serial Port configurat
====== Input/Output (IO) CFLink Protocol ======
The following documentation describes the CFLink protocol... l IO ports in a single module.
=== Data ===
<sxh cflink; light: true>
// Modular devices
> [F2]<ID>[F3]QI... Module 1, ''M4'' = Module 4.
=== Reply ===
<sxh cflink; light: true>
// Modular devices
< [F2]<ID>[F3]RI... possible modes and states.
=== Example ===
<sxh cflink; light: true>
// Query the state of IO ports in M
====== CFLink Protocol Introduction ======
This document is an overall view of the CFLink Protocol, used by CommandFusion hardware.\\
CFLink is an RS485 5-wire bus, used to interconnect various CommandFusio... al bus characteristics, please see the [[hardware:cflink:cflink-bus|CFLink Bus documentation]].\\
===== B... tructure =====
==== Hex Data ====
Throughout the CFLink Protocol documentation, hex bytes will be display
numbers (below 11) can be found on the [[hardware:cflink:lanbridge-cflink-protocol|LAN Bridge CFLink proto... idged and sent to the destination slot.
==== 3 - CFLink ID ====
If ''Destination Slot'' is configured to ''CFLink'', the CFLink ID is the device on the CFLink network to forward data to/from. This allows y... be a communication slot to a single device on the CFLink bus.\\
Use a value of ''FF'' to broadcast all dat
====== COM Module/Card CFLink Documentation ======
The following documentation is for COM (serial port) mo... urations for the module/card.
=== Data ===
<sxh cflink; light: true>
> [F2]<ID>[F3]QCOMSPC[F4]<M#>[F5][F... le/card 1, ''M4'' = Module4.
=== Reply ===
<sxh cflink; light: true>
< [F2]<ID>[F3]RCOMSPC[F4]<M#>|<P##>... d data in the SPC command.
=== Example ===
<sxh cflink; light: true>
// Query configuration for Module 2
LAN Bridge is the Ethernet & RS232 gateway to the CFLink bus. \\
Place one LAN Bridge on the CFLink network, then you can access any CFLink device within that CFLink network via Ethernet or RS232.
The LAN ... e LAN Bridge Quick Reference Guide here.]]
===== CFLink Protocol =====
For details on the CFLink protocol supported by the LAN Bridge, see the [[hardware:cflink:lanbridge-cflink-protocol|LAN Bridge CFLink Proto