This shows you the differences between two versions of the page.
software:gui-designer:wake-on-lan [2013/01/30 00:29] jarrod [How to use Wake on LAN in guiDesigner] |
software:gui-designer:wake-on-lan [2015/05/14 15:38] (current) jarrod |
||
---|---|---|---|
Line 12: | Line 12: | ||
* **IP Address / Hostname:** 255.255.255.255 | * **IP Address / Hostname:** 255.255.255.255 | ||
* **Port:** 7 or 9 (either - try both if one doesn't work, this is dependant on your hardware being controlled) | * **Port:** 7 or 9 (either - try both if one doesn't work, this is dependant on your hardware being controlled) | ||
- | * **Port Origin:** same as Port | + | * **Port Origin:** Set this to any port number above 1024. Lower port numbers might not be usable depending on the mobile platform you are running iViewer on. |
* Leave all other settings as default | * Leave all other settings as default | ||
* Press ''OK'' | * Press ''OK'' | ||
Line 20: | Line 20: | ||
Next, we will use the WOL Generator to create the "Magic Packet" required to make the WOL command work.\\ | Next, we will use the WOL Generator to create the "Magic Packet" required to make the WOL command work.\\ | ||
\\ | \\ | ||
+ | |||
To do this: | To do this: | ||
- Click on ''View'' on the menu bar, then choose ''WOL Generator'' | - Click on ''View'' on the menu bar, then choose ''WOL Generator'' |