This shows you the differences between two versions of the page.
hardware:solo [2015/07/16 03:37] jarrod [Expansion Slots] |
hardware:solo [2015/09/11 02:33] (current) jarrod |
||
---|---|---|---|
Line 2: | Line 2: | ||
The CommandFusion Solo is an IP-enabled all-in-one control system.\\ | The CommandFusion Solo is an IP-enabled all-in-one control system.\\ | ||
On-board ports include RS232 (with flow control), IR (which also operate as 1-way RS232 transmission ports), IR Blaster on 3 sides, dry contact inputs and Ethernet.\\ | On-board ports include RS232 (with flow control), IR (which also operate as 1-way RS232 transmission ports), IR Blaster on 3 sides, dry contact inputs and Ethernet.\\ | ||
- | The Solo features an on-board real time clock, allowing it to perform [[software:system-commander:scheduling|advanced scheduling]] functionality. | + | The Solo features an on-board real time clock, allowing it to perform advanced scheduling functionality. |
There are two card slots that can be used to expand the Solo with additional functionality, such as DALI, IO, RS485, CFLink and more.\\ | There are two card slots that can be used to expand the Solo with additional functionality, such as DALI, IO, RS485, CFLink and more.\\ | ||
- | See the List of Cards for more details. | + | See the [[hardware:cards|List of Cards]] for more details. |
===== Quick Reference Guide ===== | ===== Quick Reference Guide ===== | ||
- | The Solo Quick Reference Guide provides the basic information required to get started on a printable, black and white document that can be easily taken with you to a job site. [[http://www.commandfusion.com/hardware/solo#downloads|Find the Solo Quick Reference Guide here.]] | + | The Solo Quick Reference Guide provides the basic information required to get started on a printable, black and white document that can be easily taken with you to a job site. [[http://www.commandfusion.com/docs/quick/QuickReferenceGuide-Solo.pdf|Find the Solo Quick Reference Guide here.]] |
+ | |||
+ | ===== Solo Configuration ===== | ||
+ | The Solo features a built in web page configuration. Simply enter the IP Address of the Solo into any web browsers to begin configuration.\\ | ||
+ | [[hardware:solo:configuration|Click here to learn more about configuring the Solo.]] | ||
===== CFLink Protocol ===== | ===== CFLink Protocol ===== | ||
Although the Solo does not have an on-board CFLink port, it still shares the same protocol for communication and control.\\ | Although the Solo does not have an on-board CFLink port, it still shares the same protocol for communication and control.\\ | ||
+ | Use the CFLink protocol over TCP or UDP on port 10207, or via a WebSocket on port 80.\\ | ||
See the [[hardware:cflink:solo-cflink-protocol|Solo CFLink Protocol page]] for more details. | See the [[hardware:cflink:solo-cflink-protocol|Solo CFLink Protocol page]] for more details. | ||
Line 64: | Line 69: | ||
=== Pinout === | === Pinout === | ||
In 2 x RS232 mode: | In 2 x RS232 mode: | ||
- | - Tx (Port 1) | + | - P01 Tx |
- | - GND (Port 1) | + | - P01 GND |
- | - Rx (Port 1) | + | - P01 Rx |
- | - Tx (Port 2) | + | - P02 Tx |
- | - GND (Port 2) | + | - P02 GND |
- | - Rx (Port 2) | + | - P02 Rx |
In 1 x RS232 with flow control mode: | In 1 x RS232 with flow control mode: | ||
Line 153: | Line 158: | ||
For information on how to rest your device to factory settings, see the [[hardware:device-resetting|Device Resetting Page]]. | For information on how to rest your device to factory settings, see the [[hardware:device-resetting|Device Resetting Page]]. | ||
- | ===== Solo Configuration ===== | + | ===== Network Connections ===== |
- | The Solo features a built in web page configuration. Simply enter the IP Address of the Solo into any web browsers to begin configuration.\\ | + | The diagram below represents all the networking modes that the Solo is capable of. |
- | [[hardware:solo:solo-configuration|Click here to learn more about configuring the Solo.]] | + | |
+ | {{:hardware:network_connection_diagram.svg|}} |