User Tools
hardware:lan-bridge:lan-bridge-configuration:general-tab
Differences
This shows you the differences between two versions of the page.
|
hardware:lan-bridge:lan-bridge-configuration:general-tab [2014/01/10 03:44] aaron created |
hardware:lan-bridge:lan-bridge-configuration:general-tab [2014/01/14 03:38] (current) aaron |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== General Tab ====== | ====== General Tab ====== | ||
| - | ===== General ===== | ||
| {{:hardware:lan_bridge_general_tab.png?nolink|}} | {{:hardware:lan_bridge_general_tab.png?nolink|}} | ||
| The general tab allows you to configure the following information. | The general tab allows you to configure the following information. | ||
| - | ==== 1 - Device Info ==== | + | ===== 1 - Device Info ===== |
| Change the CFLink ID of the device by using the up and down arrows or by entering a number. The CFLink ID must be between 2 and 238. This number must also be unique on the CFLink network, if there is a CFLink conflict the LAN bridge will [[software:system-commander:quick-start-guide:quick-start-page-2#automatic-id-conflict-resolution|automatically assign the device a different ID]]. | Change the CFLink ID of the device by using the up and down arrows or by entering a number. The CFLink ID must be between 2 and 238. This number must also be unique on the CFLink network, if there is a CFLink conflict the LAN bridge will [[software:system-commander:quick-start-guide:quick-start-page-2#automatic-id-conflict-resolution|automatically assign the device a different ID]]. | ||
| Line 12: | Line 11: | ||
| To turn off UDP broadcasting, un-tick the box labelled ''UDP 10207 Broadcast''. | To turn off UDP broadcasting, un-tick the box labelled ''UDP 10207 Broadcast''. | ||
| - | ==== 2 - Real Time Clock ==== | + | ===== 2 - Real Time Clock ===== |
| Change the real time clock settings here. | Change the real time clock settings here. | ||
| Line 19: | Line 18: | ||
| ''Sync to PC time when save'' will change the clock settings to match your PC settings when you next click the ''Save'' button. | ''Sync to PC time when save'' will change the clock settings to match your PC settings when you next click the ''Save'' button. | ||
| - | ==== 3 - Local Area Network (LAN) ==== | + | ===== 3 - Local Area Network (LAN) ===== |
| Configure your LAN settings here. If DHCP is clocked on, then the device will get all the LAN settings from the DHCP server and you will not be able to change any of the settings manually. | Configure your LAN settings here. If DHCP is clocked on, then the device will get all the LAN settings from the DHCP server and you will not be able to change any of the settings manually. | ||
| - | ==== 4 - RS232 ==== | + | ===== 4 - RS232 ===== |
| Change the settings for the in built RS232 port. | Change the settings for the in built RS232 port. | ||
| Line 31: | Line 30: | ||
| All other settings are set as per a standard RS232 connection and should be changed if required to communicate to your desired device. | All other settings are set as per a standard RS232 connection and should be changed if required to communicate to your desired device. | ||
| - | ==== 5 - Buttons ==== | + | ===== 5 - Buttons ===== |
| The ''Reset'' button will reset the device, it is essentially the same as removing the power for a short amount of time. | The ''Reset'' button will reset the device, it is essentially the same as removing the power for a short amount of time. | ||
hardware/lan-bridge/lan-bridge-configuration/general-tab.1389325464.txt.gz ยท Last modified: 2014/01/10 03:44 by aaron
