CommandFusion Wiki

Documentation Resources

User Tools

Site Tools


hardware:cflink:error-codes

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

hardware:cflink:error-codes [2015/06/02 01:09]
jarrod
hardware:cflink:error-codes [2021/05/16 23:58] (current)
jarrod [100 - 199: LAN Bridge & Solo Error Codes]
Line 14: Line 14:
   * 006 = Invalid ''​TGT''​ CFLink ID   * 006 = Invalid ''​TGT''​ CFLink ID
   * 007 = Duplicate ''​TGT''​ CFLink ID Defined   * 007 = Duplicate ''​TGT''​ CFLink ID Defined
-  * 008 = ''​TGT''​ CFLink ID is local Sub ID+  * 008 = ''​TGT''​ CFLink ID is local CFLink ​ID
   * 009 = ''​DID''​ Invalid CFLink ID   * 009 = ''​DID''​ Invalid CFLink ID
   * 010 = ''​DID''​ Invalid Serial Number   * 010 = ''​DID''​ Invalid Serial Number
   * 011 = ''​DID''​ Serial Number did not match target device   * 011 = ''​DID''​ Serial Number did not match target device
 +  * 012 = Multiple module numbers are not supported for this command
 +  * 013 = Memory file format error
 +  * 014 = File read ended unexpectedly
 +  * 015 = Failure MOD-IR8 hardware
 +  * 016 = Memory empty
 +  * 017 = Invalid checksum
 +  * 019 = Another HTTP Request is still in progress.
  
 ==== Rules Engine Errors ==== ==== Rules Engine Errors ====
Line 68: Line 75:
   * 083 = ''​SPW''​ Command, but not in 232 Mode   * 083 = ''​SPW''​ Command, but not in 232 Mode
  
-===== 100 - 199: LAN Bridge Error Codes =====+===== 100 - 199: LAN Bridge ​& Solo Error Codes =====
  
   * 100 = Invalid IP Address   * 100 = Invalid IP Address
Line 104: Line 111:
   * 132 = Slot 2 is not subscribed to Slot 1   * 132 = Slot 2 is not subscribed to Slot 1
   * 133 = ''​SND''​ Command Invalid Packet   * 133 = ''​SND''​ Command Invalid Packet
 +  * 134 = Invalid authentication. Must login using CLANPWD command on first connection.
 +  * 151 = ''​RUN''​ command macro name could not be found.
 +  * 153 = Network slot configured as UDP socket, but data could not be sent to the network. Check network settings.
 +  * 154 = Network slot configured as TCP Client, but was not connected to a TCP Server. Data could not be sent.
 +  * 155 = Network slot is disabled. Data cannot be sent on this slot.
 +  * 157 = Network Bridging configuration is invalid - too many sockets are required. Check network slot configurations.
  
 ===== 200 - 224: CFMini Error Codes ===== ===== 200 - 224: CFMini Error Codes =====
hardware/cflink/error-codes.1433207374.txt.gz ยท Last modified: 2015/06/02 01:09 by jarrod