CommandFusion Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Error Codes ======

This document outlines all error codes reported by the CFLink protocol.

===== 001 - 074: Common Error Codes =====

The below error codes are common across all devices, including error codes for Rule definitions.

  * 001 = Does not comply with CFLink format
  * 002 = Command not recognised
  * 003 = Invalid Port Number
  * 004 = Invalid Module Number
  * 005 = Invalid Payload Field
  * 006 = Invalid ''TGT'' CFLink ID
  * 007 = Duplicate ''TGT'' CFLink ID Defined
  * 008 = ''TGT'' CFLink ID is local CFLink ID
  * 009 = ''DID'' Invalid CFLink ID
  * 010 = ''DID'' Invalid Serial Number
  * 011 = ''DID'' Serial Number did not match target device
  * 012 = Multiple module numbers are not supported for this command
  * 013 = Memory file format error
  * 014 = File read ended unexpectedly
  * 015 = Failure MOD-IR8 hardware
  * 016 = Memory empty
  * 017 = Invalid checksum
  * 018 = Invalid IPv4 address
  * 019 = Invalid Gateway

==== Rules Engine Errors ====
  * 020 = ''RLW'' Invalid Payload
  * 021 = ''RLW'' Invalid Address
  * 022 = ''RLW'' Invalid Payload
  * 021 = ''RLW'' Invalid Address
  * 022 = ''RLW'' Invalid Rules Entry Start Address
  * 023 = ''RLW'' Invalid Number of Macro
  * 024 = ''RLW'' Invalid Macro Entry
  * 025 = ''RLW'' Invalid Length of Macro Entry
  * 026 = ''RLW'' Invalid Length of Macro Name
  * 027 = ''RLW'' Invalid Macro Name
  * 028 = ''RLW'' Macro Name is empty
  * 029 = ''RLW'' Invalid Number of Actions
  * 030 = ''RLW'' Invalid Action Entry
  * 031 = ''RLW'' Invalid Length of Action Entry
  * 032 = ''RLW'' Invalid Action Delay
  * 033 = ''RLW'' Invalid Action Data
  * 034 = ''RLW'' Action Data does not comply with CF Protocol
  * 035 = ''RLW'' Action Data is Empty
  * 036 = ''RLW'' Invalid Number of Rules
  * 037 = ''RLW'' Invalid Rules Entry
  * 038 = ''RLW'' Invalid Rules Name
  * 039 = ''RLW'' Invalid Length of Search String
  * 040 = ''RLW'' Invalid Search String
  * 041 = ''RLW'' Search String is Empty
  * 042 = ''RLW'' Invalid Length of mapped macro name
  * 043 = ''RLW'' Invalid Macro Name in Rules Entry
  * 044 = ''RLW'' Macro Name in Rules Entry is empty
  * 045 = ''RLW'' Invalid ENDRLS Identifier
  * 046 = ''RLW'' Unable to perform actions due to out of memory
  * 047 = ''RLW'' Duplicate Macro Name
  * 048 = ''RLW'' Macro Name in Rules Entry is not exist in Macro Entry
  * 049 = ''RLW'' Duplicate Search String and Mapped Macro Name
  * 050 = ''RLW'' Cumulative of Action Delay exceed the maximum value Invalid Rules Entry Start Address

===== 075 - 099: On-Board RS232 Error Codes =====

The below error codes are common across all devices with an on-board RS232 port.

  * 075 = Invalid COM Settings
  * 076 = Invalid Mode
  * 077 = Invalid Baudrate
  * 078 = Invalid Data bit
  * 079 = Invalid Parity bit
  * 080 = Invalid Stop bit
  * 081 = Invalid Flow Control
  * 082 = ''SPW'' Invalid Data
  * 083 = ''SPW'' Command, but not in 232 Mode

===== 100 - 199: LAN Bridge Error Codes =====

  * 100 = Invalid IP Address
  * 101 = Invalid Gateway
  * 102 = Invalid Subnetmask
  * 103 = Invalid DHCP Settings
  * 104 = Invalid UDP Broadcast Settings
  * 105 = Invalid TME Settings
  * 106 = Invalid Year
  * 107 = Invalid Month
  * 108 = Invalid Date
  * 109 = Invalid Day
  * 110 = Invalid Hour
  * 111 = Invalid Minute
  * 112 = Invalid Seconds
  * 113 = Invalid UTC Timezone
  * 114 = Onboard Real Time Clock malfunction
  * 115 = Invalid Slot Settings
  * 116 = Invalid Slot Number
  * 117 = Invalid Slot Mode
  * 118 = Invalid Slot IP Address
  * 119 = Invalid Slot Port Number
  * 120 = Invalid Slot Timeout
  * 121 = Invalid Slot Maximum Connections
  * 122 = Invalid Slot TCP Echo Mode
  * 123 = LAN Bridge number of TCP Connections exceed the maximum limit
  * 124 = Invalid Subscription Settings
  * 125 = Invalid Subscription Slot A
  * 126 = Invalid Subscription Slot B
  * 127 = Invalid Subscription CF ID
  * 128 = Invalid Subscription Module
  * 129 = Invalid Subscription TX Command
  * 130 = Invalid Subscription RX Command
  * 131 = Slot A and Slot B Identical
  * 132 = Slot 2 is not subscribed to Slot 1
  * 133 = ''SND'' Command Invalid Packet

===== 200 - 224: CFMini Error Codes =====

===== 225 - 249: IRBlaster Error Codes =====

===== 249 - 299: SW16 Error Codes =====

  * 249 = Invalid LED Mode
  * 250 = Invalid Time Defined
  * 251 = Invalid Count Defined
  * 252 = Invalid LED Level Defined
  * 253 = Max LED Level is less than Min LED Level
  * 254 = Invalid LED Command

===== 300 - 349: DIN-MOD4 & MOD4 Error Codes =====

===== 350 - 399: COM Error Codes =====

  * 350 = Port P03/P04 cannot be 485H or 4XXF if P01/P02 is not also one of those 2.
  * 351 = Pair modes (RS232H,485H and 4XXF)cannot be specified for ports P02 or P04.
  * 352 = Flow control must be zero for any mode except 232.
  * 353 = Buffer is full
  * 354 = Invalid Port Write. Port is in OFF mode.

===== 400 - 424: Relay Error Codes =====

  * 400 = Invalid Relay Pulse Time
  * 401 = Invalid Relay Power On State
  * 402 = Invalid Relay State
===== 425 - 449: IO Error Codes =====

  * 425 = ''PRT'' Invalid IO Port Mode
  * 426 = ''PRT'' Invalid IO Port Minimum Change
  * 427 = ''PRT'' Invalid IO Port Power On State
  * 428 = ''SET'' Invalid IO State
  * 429 = ''CFG'' Invalid IO Reporting Interval
  * 430 = ''CFG'' Invalid IO Report On Change
  * 431 = ''CFG'' Invalid IO Enabled

===== 450 - 474: IR Error Codes =====

  * 450 = ''SND'' Invalid IR Format Type
  * 451 = ''SND'' Invalid IR Database Parameters
  * 452 = ''SND'' Invalid IR Memory Parameters
  * 453 = ''SND'' Invalid IR Raw Hex Code
  * 454 = ''SND'' Invalid CF IR format
  * 455 = ''SND'' <DEVICE> doesn't exist in MEM database
  * 456 = ''SND'' <FUNCTION> doesn't exist in MEM database
  * 457 = ''SND'' <DEVICE_CODE> doesn't exist in DBA database
  * 458 = ''SND'' <DEVICE_TYPE> doesn't exist in DBA database
  * 459 = ''SND'' <KEY_CODE> doesn't exist in DBA database
  * 469 = ''DBA'' hardware error. UEI Gondar II (-3G) is out of synch.
  * 470 = ''MEM'' database error. Invalid IRX format.
  * 471 = Invalid IR Rules Format.
CommandFusion Wiki

User Tools

Site Tools

Page Tools
