CommandFusion Wiki

Documentation Resources

User Tools

Site Tools


bootloader-mode

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

bootloader-mode [2018/11/28 22:37]
jarrod
bootloader-mode [2018/11/28 22:38] (current)
jarrod
Line 19: Line 19:
 This will force the device to begin deleting it's current firmware, as signified by the red '​ERROR'​ LED flashing rapidly (LED may look on, but its just flashing really fast). The device will then reboot into bootloader mode, and the power LED should remain flashing. This will force the device to begin deleting it's current firmware, as signified by the red '​ERROR'​ LED flashing rapidly (LED may look on, but its just flashing really fast). The device will then reboot into bootloader mode, and the power LED should remain flashing.
  
-The device is now ready to accept new firmware. ​Follow ​the [[hardware:​firmware-force-update|firmware guides]] to achieve this.+The device is now ready to accept new firmware. ​It will show up in System Commander with a red indicator in the CFLink Devices list. You can click on it and the firmware tab will become visible to upload firmware. 
 + 
 +For more info and options, follow ​the [[hardware:​firmware-force-update|firmware guides]] to achieve this.
  
bootloader-mode.1543444630.txt.gz · Last modified: 2013/01/14 03:50 (external edit)