Table of Contents

MOD-IR8 Configuration

Port

Select the IR port you want to send the command from. These ports are labelled on your module.

Format

Select the format you wish to send the IR data in.

Data

Enter the IR data to send in the format specified.

When you have MEM or DBA selected as the format, an additional Build (A in the image below) button will show up. This allows you to build a command either from the onboard database or from an IR file loaded onto the device.

IR Data Builder - On-Board Database

Use the IR data builder to easily craft a command from the built in IR database to send to the selected IR port on your device.

When you click OK you will see that the Data field is now. populated with a command.

IR Data Builder - On Board Memory

Use the IR data builder to easily craft a command from any IR files you have uploaded to the device.

Send Button

Click this button to send the command immediately from the selected IR port.