CommandFusion Wiki

Documentation Resources

User Tools

Site Tools


software:system-commander:tcp-socket-multiplexing

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

software:system-commander:tcp-socket-multiplexing [2014/12/15 21:31]
jarrod [Configure the Communication Slots]
software:system-commander:tcp-socket-multiplexing [2014/12/15 21:32] (current)
jarrod [Configure the Communication Slots]
Line 26: Line 26:
   - Slot #14 configured as a TCP Server - the connection to each iPad, etc   - Slot #14 configured as a TCP Server - the connection to each iPad, etc
   - Enter IP address of 0.0.0.0 to allow any client IP address to connect   - Enter IP address of 0.0.0.0 to allow any client IP address to connect
-  - Enter a port number that all clients (iPads, etc) will use to connect+  - Enter a port number that all clients (iPads, etc) will use to connect. This can be any port number you desire, just so long as you use the same port in both the LAN Bridge config and your guiDesigner system.
  
 ==== Bridge the Communication Slots ==== ==== Bridge the Communication Slots ====
software/system-commander/tcp-socket-multiplexing.1418679089.txt.gz ยท Last modified: 2014/12/15 21:31 by jarrod