This shows you the differences between two versions of the page.
software:system-commander:device-discovery [2012/10/12 00:00] jarrod created |
software:system-commander:device-discovery [2012/12/20 05:47] (current) aaron [Device Discovery] Added image of discovery types |
||
---|---|---|---|
Line 1: | Line 1: | ||
====== Device Discovery ====== | ====== Device Discovery ====== | ||
+ | |||
+ | See the [[https://www.youtube.com/watch?feature=player_detailpage&v=w-UwmiZx1cU#t=397s|Auto Discovery section of our System Commander Quick Start Guide]] for the basics of auto discovery. | ||
System Commander can automatically discover devices in two ways: | System Commander can automatically discover devices in two ways: | ||
Line 5: | Line 7: | ||
- Via the local network using UDP broadcast communications with a [[hardware:lan-bridge|LAN Bridge]]. | - Via the local network using UDP broadcast communications with a [[hardware:lan-bridge|LAN Bridge]]. | ||
- Via RS232 communications with any device with an [[hardware:cflink:on-board-rs232-port-protocol|on-board RS232 port]]. | - Via RS232 communications with any device with an [[hardware:cflink:on-board-rs232-port-protocol|on-board RS232 port]]. | ||
+ | {{ :software:system-commander:automatic_discovery_mode.png?nolink |}} | ||
===== UDP Discovery ===== | ===== UDP Discovery ===== | ||
Line 25: | Line 27: | ||
If you are unsure, try each listed port until you find the correct one. | If you are unsure, try each listed port until you find the correct one. | ||
- | ===== Online Mode ===== | + | ====== Online Mode ====== |
After your communication method is configured, you can go into 'Online Mode' to begin the device discovery process.\\ | After your communication method is configured, you can go into 'Online Mode' to begin the device discovery process.\\ | ||
Line 32: | Line 34: | ||
* Pressing the 'Offline' indicator to toggle into online mode. | * Pressing the 'Offline' indicator to toggle into online mode. | ||
* Using the F12 keyboard shortcut. | * Using the F12 keyboard shortcut. | ||
+ | |||
+ | The device discovery process will begin, and any discovered devices will appear in the tree on the left below the 'Online' indicator.\\ | ||
+ | This tree of devices can be refreshed at any time by clicking the 'Scan for Devices' button above the device tree. | ||
+ | |||
+ | Select any device in the tree to begin configuring its settings. | ||
+ | ====== How it Works ====== | ||
+ | A basic visualisation as to how it works: | ||
+ | |||
+ | {{ :software:system-commander:auto_discovery.swf?700x394 |}} |