CommandFusion Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Licensing Not Working ======
If your CommandFusion iViewer license is not working (or has stopped working for any reason) please follow these instructions:

  - Check that the Device ID used to register the device matches the one shown in our guiDesigner upload service window when you attempt to load your GUI - [[software:iviewer:licensing:retrieving-your-device-id|Retrieving your Device ID]].
  - Check that you have added the registration code into your GUI and that you have saved the guiDesigner project before attempting to upload it to your device.

===== Device ID Discrepancies =====
If the Device ID being shown in the guiDesigner Upload Service differs from the one you used to register your device, please transfer your device license via the [[http://www.commandfusion.com/myaccount|My Account]] section of the CommandFusion website.

If you have used up your 3 allowed license transfers, but believe you have a valid reason for an additional transfer, then please submit a support ticket with the following information:
  - Old device ID
  - New Device ID
  - Email address the license is associated with
  - Reason for the transfer

Then we can look at manually processing the transfer the license for you.

===== Why has the Device ID format changed? =====
Since iOS 6.0.1, Apple has removed the ability for apps to access the hardware Device ID that our licensing system was using. So we have built in a new Device ID format just for our iViewer software licensing. Devices that were previously licensed and running iViewer4 should remain licensed without any changes. But in some cases the new Device ID must be used.

We apologise for any inconvenience this may cause, but it is a necessary change due to Apple's privacy concerns related to accessing the hardware device ID and MAC address.
CommandFusion Wiki

User Tools

Site Tools

Page Tools
