User Tools
software:gui-designer:wake-on-lan
Differences
This shows you the differences between two versions of the page.
|
software:gui-designer:wake-on-lan [2013/07/28 07:00] terrylau [How to use Wake on LAN in guiDesigner] |
software:gui-designer:wake-on-lan [2015/05/14 15:38] (current) jarrod |
||
|---|---|---|---|
| Line 12: | Line 12: | ||
| * **IP Address / Hostname:** 255.255.255.255 | * **IP Address / Hostname:** 255.255.255.255 | ||
| * **Port:** 7 or 9 (either - try both if one doesn't work, this is dependant on your hardware being controlled) | * **Port:** 7 or 9 (either - try both if one doesn't work, this is dependant on your hardware being controlled) | ||
| - | * **Port Origin:** same as Port | + | * **Port Origin:** Set this to any port number above 1024. Lower port numbers might not be usable depending on the mobile platform you are running iViewer on. |
| * Leave all other settings as default | * Leave all other settings as default | ||
| * Press ''OK'' | * Press ''OK'' | ||
software/gui-designer/wake-on-lan.1374994855.txt.gz ยท Last modified: 2013/07/28 07:00 by terrylau
