CommandFusion Wiki

Documentation Resources

User Tools

Site Tools


software:gui-designer:wake-on-lan

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

software:gui-designer:wake-on-lan [2013/01/30 00:28]
jarrod
software:gui-designer:wake-on-lan [2015/05/14 15:38] (current)
jarrod
Line 12: Line 12:
   * **IP Address / Hostname:** 255.255.255.255   * **IP Address / Hostname:** 255.255.255.255
   * **Port:** 7 or 9 (either - try both if one doesn'​t work, this is dependant on your hardware being controlled)   * **Port:** 7 or 9 (either - try both if one doesn'​t work, this is dependant on your hardware being controlled)
-  * **Port Origin:​** ​same as Port+  * **Port Origin:​** ​Set this to any port number above 1024. Lower port numbers might not be usable depending on the mobile platform you are running iViewer on.
   * Leave all other settings as default   * Leave all other settings as default
   * Press ''​OK''​   * Press ''​OK''​
Line 20: Line 20:
 Next, we will use the WOL Generator to create the "Magic Packet"​ required to make the WOL command work.\\ Next, we will use the WOL Generator to create the "Magic Packet"​ required to make the WOL command work.\\
 \\ \\
 +
 To do this: To do this:
   - Click on ''​View''​ on the menu bar, then choose ''​WOL Generator''​   - Click on ''​View''​ on the menu bar, then choose ''​WOL Generator''​
Line 29: Line 30:
 \\ \\
 An example of a WOL magic packet:\\ An example of a WOL magic packet:\\
-\xFF\xFF\xFF\xFF\xFF\xFF\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF \\+''​\xFF\xFF\xFF\xFF\xFF\xFF\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF\x45\xE4\x5A\xD3\x44\xAF'' ​\\
 \\ \\
 Now we need to create a command.\\ Now we need to create a command.\\
software/gui-designer/wake-on-lan.txt ยท Last modified: 2015/05/14 15:38 by jarrod