This shows you the differences between two versions of the page.
hardware:sw16:sw16-configuration:general-tab [2014/04/23 05:37] aaron created |
hardware:sw16:sw16-configuration:general-tab [2014/04/24 04:23] (current) aaron |
||
---|---|---|---|
Line 10: | Line 10: | ||
The ''Reset'' Button restarts the device. | The ''Reset'' Button restarts the device. | ||
+ | |||
+ | ===== 2 - Port Testing Settings ===== | ||
+ | This is where you set the relevant values for testing the ports on your SW16. | ||
+ | |||
+ | ===== 3 - Port Testing ===== | ||
+ | Each SW16 port is capable of multiple functions. Each of these functions can be tested from this section. | ||
+ | |||
+ | Click each relevant button under your port heading to test this functionality subject to the settings chosen. | ||
+ | |||
+ | ==== On ==== | ||
+ | |||
+ | ==== Off ==== | ||
+ | |||
+ | ==== Toggle ==== | ||
+ | |||
+ | ==== Pulse ==== | ||
+ | |||
+ | ==== Blink ==== | ||
+ | |||
+ | ==== Dim ==== | ||
+ | |||
+ | ==== Ramp ==== | ||
+ | |||
+ | ===== 4 - Backlight LED Port Testing ===== | ||
+ | Each SW16 LED port is capable of multiple functions. Each of these functions can be tested from this section. | ||
+ | |||
+ | Click each relevant button under your port heading to test this functionality subject to the settings chosen. | ||
+ | |||
+ | ==== On ==== | ||
+ | |||
+ | ==== Off ==== | ||
+ | |||
+ | ==== Toggle ==== | ||
+ | |||
+ | ==== Pulse ==== | ||
+ | |||
+ | ==== Blink ==== | ||
+ | |||
+ | ==== Dim ==== | ||
+ | |||
+ | ==== Ramp ==== | ||