CommandFusion Wiki

Documentation Resources

User Tools

Site Tools


hardware:rules

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

hardware:rules [2014/01/13 04:59]
jarrod [CFLink Protocol]
hardware:rules [2015/12/23 00:26] (current)
jarrod [Rule Properties]
Line 15: Line 15:
  
   * **Name** = A name given to the rule for your records. The name has no effect on anything, it's just a way to remember what a rule was created for.   * **Name** = A name given to the rule for your records. The name has no effect on anything, it's just a way to remember what a rule was created for.
-  * **Search String** = A search pattern to match an outgoing CFLink message (as well as incoming TCP/UDP packets for LAN Bridge rules). When this search pattern matches ​any the message, the rule is triggered.\\ Search strings can contain wildcard match characters as follows:+  * **Search String** = A search pattern to match an outgoing CFLink message (as well as incoming TCP/UDP packets for LAN Bridge rules). When this search pattern matches ​message, the rule is triggered.\\ Search strings can contain wildcard match characters as follows:
     * ''​*''​ (asterisk) means match any character zero or more times, until the next defined character in the search string is found, or until the end of the message.     * ''​*''​ (asterisk) means match any character zero or more times, until the next defined character in the search string is found, or until the end of the message.
     * ''​.''​ (period) means match any character a single time.     * ''​.''​ (period) means match any character a single time.
Line 29: Line 29:
     * **Delay** = The delay before the command data for this action is sent. This delay is sequential, meaning its the delay from the action above it, NOT a delay from the start of the macro. The delay occurs BEFORE the command is sent. Use a delay of 0 (zero) to instantly send the command data.     * **Delay** = The delay before the command data for this action is sent. This delay is sequential, meaning its the delay from the action above it, NOT a delay from the start of the macro. The delay occurs BEFORE the command is sent. Use a delay of 0 (zero) to instantly send the command data.
  
-====== Rules Tab ====== +====== ​System Commander ​Rules Tab ====== 
-The rules tab allows you to create and add macros and rules to be run on your device. This tab is identical across all CommandFusion hardware that supports our Rules Engine.+The rules tab within [[software:​system-commander|System Commander]] ​allows you to create and add macros and rules to be run on your device. This tab is identical across all CommandFusion hardware that supports our Rules Engine.
  
 {{:​hardware:​lan-bridge:​lan-bridge-configuration:​lan_bridge_rules_tab.png?​nolink|}} {{:​hardware:​lan-bridge:​lan-bridge-configuration:​lan_bridge_rules_tab.png?​nolink|}}
Line 58: Line 58:
 Saves all changes made to the device. Saves all changes made to the device.
  
-==== CFLink Protocol ====+====== CFLink Protocol ​======
 For details on the CFLink protocol used to create and delete rules, please see the [[hardware:​cflink:​rules|Rules Protocol wiki entry]]. For details on the CFLink protocol used to create and delete rules, please see the [[hardware:​cflink:​rules|Rules Protocol wiki entry]].
hardware/rules.1389589193.txt.gz · Last modified: 2014/01/13 04:59 by jarrod