CommandFusion Wiki

Documentation Resources

User Tools

Site Tools


hardware:quick-start:ir-blaster-ir-rules

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

hardware:quick-start:ir-blaster-ir-rules [2013/09/18 03:38]
aaron
hardware:quick-start:ir-blaster-ir-rules [2013/09/20 02:57] (current)
aaron
Line 2: Line 2:
  
 ===== IR Blaster Overview ===== ===== IR Blaster Overview =====
-The CommandFusion IR Blaster designed to literally blast out IR in many directions at once to flood a room with IR. +The CommandFusion ​[[hardware:​ir-blaster|IR Blaster]] designed to literally blast out IR in many directions at once to flood a room with IR. 
  
 This can be used to control a number of devices at once, without needing to run an individual wired emitter to each unit. This can be used to control a number of devices at once, without needing to run an individual wired emitter to each unit.
Line 89: Line 89:
 {{:​hardware:​quick-start:​ir_rules_flow.png?​nolink&​900|}} {{:​hardware:​quick-start:​ir_rules_flow.png?​nolink&​900|}}
  
-So first we create our macros. This is the macro that the IR blaster will activate to send the Soniq code when it receives the corresponding IR Command from the Samsung remote Do this by going to the IR Rules tab, then clicking ​add macro (1 in image below). Enter and appropriate Macro name (2 in image below) and click OK.+So first we create our macros. This is the macro that the IR blaster will activate to send the Soniq code when it receives the corresponding IR Command from the Samsung remote Do this by going to the IR Rules tab, then clicking ​''​Add Macro'' ​(1 in image below). Enter and appropriate Macro name (2 in image below) and click OK.
  
 {{:​hardware:​quick-start:​add_macro.png?​nolink|}} {{:​hardware:​quick-start:​add_macro.png?​nolink|}}
hardware/quick-start/ir-blaster-ir-rules.1379475497.txt.gz ยท Last modified: 2013/09/18 03:38 by aaron