User Tools
hardware:modules:mod-io8:mod-io8-configuration
Differences
This shows you the differences between two versions of the page.
|
hardware:modules:mod-io8:mod-io8-configuration [2014/03/07 03:57] jarrod [3 - I/O Port Settings] |
hardware:modules:mod-io8:mod-io8-configuration [2014/03/07 03:59] (current) jarrod [3 - I/O Port Settings] |
||
|---|---|---|---|
| Line 30: | Line 30: | ||
| Use the ''Min. Change'' section to adjust the point at which the module will report. This is the amount the value has to change by before the notification will be sent. If it is a greyed out 0, then the setting is not required for your selected I/O mode. | Use the ''Min. Change'' section to adjust the point at which the module will report. This is the amount the value has to change by before the notification will be sent. If it is a greyed out 0, then the setting is not required for your selected I/O mode. | ||
| - | Set the power on state for each port. If you can not select anything apart from off, then the power on state has no effect with your selected I/O mode. | + | Set the power on state for each port. This setting is only relevant to ports configured to one of the output modes. If you can not select anything apart from off, then the power on state has no effect with your selected I/O mode. |
| Click the ''Save button'' to save your changes to the module. Click the ''Refresh'' button to retrieve the settings from the module. | Click the ''Save button'' to save your changes to the module. Click the ''Refresh'' button to retrieve the settings from the module. | ||
hardware/modules/mod-io8/mod-io8-configuration.1394164651.txt.gz ยท Last modified: 2014/03/07 03:57 by jarrod
