CommandFusion Wiki

Documentation Resources

User Tools

Site Tools


hardware:modules:mod-com4

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

hardware:modules:mod-com4 [2013/03/04 01:07]
aaron
hardware:modules:mod-com4 [2013/09/02 05:03] (current)
jarrod [Front Pinouts]
Line 2: Line 2:
 The MOD-COM4 is a modular unit capable of up to 4 x RS232 ports, also configurable for RS422 and RS485.\\ The MOD-COM4 is a modular unit capable of up to 4 x RS232 ports, also configurable for RS422 and RS485.\\
  
 +===== Quick Reference Guide =====
 +
 +The Modules Quick Reference Guide provides the basic information required to get started on a printable, black and white document that can be easily taken with you to a job site. [[http://​www.commandfusion.com/​docs/​quick/​QuickReferenceGuide-Modules.pdf|Find the Modules Quick Reference Guide here.]]
  
-http://​www.commandfusion.com/​docs/​quick/​QuickReferenceGuide-Modules.pdf 
  
 ===== Ports ===== ===== Ports =====
Line 39: Line 41:
  
 **1 x RS485 half-duplex** **1 x RS485 half-duplex**
-  - Data ++  - Data + (B)
   - Ground   - Ground
   - Not Connected   - Not Connected
-  - Data -+  - Data - (A)
   - Ground   - Ground
   - Not Connected   - Not Connected
Line 57: Line 59:
 The rear of every module contains a module port, used to connect the module into the modular controller base unit (DIN-MOD4, etc).\\ The rear of every module contains a module port, used to connect the module into the modular controller base unit (DIN-MOD4, etc).\\
 The pinout for this port is not published (as it has no benefit to any user). The pinout for this port is not published (as it has no benefit to any user).
- 
  
  
hardware/modules/mod-com4.txt ยท Last modified: 2013/09/02 05:03 by jarrod