This shows you the differences between two versions of the page.
hardware:knowledge-base:virtual-com-port [2013/09/26 05:19] jarrod |
hardware:knowledge-base:virtual-com-port [2013/09/26 05:21] (current) jarrod [CommandFusion Hardware Configuration] |
||
---|---|---|---|
Line 7: | Line 7: | ||
===== CommandFusion Hardware Configuration ===== | ===== CommandFusion Hardware Configuration ===== | ||
The LAN Bridge must be configured to route data from a specific TCP port to the on-board serial port on the CFLink bus that you want to communicate with via the virtual serial port.\\ | The LAN Bridge must be configured to route data from a specific TCP port to the on-board serial port on the CFLink bus that you want to communicate with via the virtual serial port.\\ | ||
- | By default, the LAN Bridge will have TCP port 10208 bridged to the on-board COM port of the LAN Bridge.\\ | + | By default, the LAN Bridge will have TCP port 10208 bridged to the on-board COM port of the LAN Bridge. So you can use the IP Address of the LAN Bridge and port number 10208 in the HW VPS3 settings. |
Optionally you can also route data to another COM port in the CFLink network by creating a new TCP Server slot in the LAN Bridge "Slots" tab of System Commander.\\ | Optionally you can also route data to another COM port in the CFLink network by creating a new TCP Server slot in the LAN Bridge "Slots" tab of System Commander.\\ |