User Tools
hardware:knowledge-base:virtual-com-port
Differences
This shows you the differences between two versions of the page.
|
hardware:knowledge-base:virtual-com-port [2013/09/26 05:19] jarrod |
hardware:knowledge-base:virtual-com-port [2013/09/26 05:21] (current) jarrod [CommandFusion Hardware Configuration] |
||
|---|---|---|---|
| Line 7: | Line 7: | ||
| ===== CommandFusion Hardware Configuration ===== | ===== CommandFusion Hardware Configuration ===== | ||
| The LAN Bridge must be configured to route data from a specific TCP port to the on-board serial port on the CFLink bus that you want to communicate with via the virtual serial port.\\ | The LAN Bridge must be configured to route data from a specific TCP port to the on-board serial port on the CFLink bus that you want to communicate with via the virtual serial port.\\ | ||
| - | By default, the LAN Bridge will have TCP port 10208 bridged to the on-board COM port of the LAN Bridge.\\ | + | By default, the LAN Bridge will have TCP port 10208 bridged to the on-board COM port of the LAN Bridge. So you can use the IP Address of the LAN Bridge and port number 10208 in the HW VPS3 settings. |
| Optionally you can also route data to another COM port in the CFLink network by creating a new TCP Server slot in the LAN Bridge "Slots" tab of System Commander.\\ | Optionally you can also route data to another COM port in the CFLink network by creating a new TCP Server slot in the LAN Bridge "Slots" tab of System Commander.\\ | ||
hardware/knowledge-base/virtual-com-port.1380172790.txt.gz · Last modified: 2013/09/26 05:19 by jarrod
