You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate tool.
well as a 3.5mm IR receiver input.
{{:hardware:quick-start:ir_flood.png?nolink|}}
===== IR Rules =====
The IR ... Bluray player.
If you don't know how to use the IRLearner software, you can check out our q[[hardware:quick-start:ir-learner|uick startguide for the IRLearner]].\\
So Learn the commands that you want to send to the Soniq Bluray player, and save the IR F... You can check out the [[software:system-commander:quick-start-guide:|System Command quickstartguide here]].
For now, we will assume you know the bas
====== IRLearnerQuickStartGuide ======
The CommandFusion IRLearner contains an IR receiver for learning new remote control... xD0OEGVeA 560px,315px noscroll noborder alignment|IRLearnerQuickStartGuide}}
===== Connecting the IRLearner =====
The Com... iting IR Device Information =====
On launch, the IRLearner software will automatically start a new IR file.\\
The first step is then to edit t... – click the ‘Edit Details’ button\\
{{ :hardware:ir-learner:edit_details_button.png?nolink |}}\\
\\
You must
an also be utilised by CommandFusion's [[hardware:quick-start:ir-learner|IRlearner software.]]\\
===== How To Use The Mega List Dat... the IRLearner software.\\
\\
See the [[hardware:quick-start:ir-learner|IRLearnerquickstartguide]] for information on how to download, install and... ee the Testing Commands section of our [[hardware:quick-start:ir-learner#testing-learnt-ir-codes|IRLearnerQuickStartGuide.]]
==== Utilising IR Commands ====
To see how to utilise the commands in the function list, see th
====== QuickStartGuide Page 4 - System Commander ======
A video version of this quickstartguide is [[https://www.... pm every weekday.\\
{{ :software:system-commander:quick-start-guide:basic_scheduling_2.swf?700x394 |}}
The first ste... hen click ''OK''\\
{{ :software:system-commander:quick-start-guide:system_commander_scheduling_create_new_macro.png?... nd press ''OK''. \\
{{ :software:system-commander:quick-start-guide:system_commander_scheduling_create_new_macro.png?
====== IRLearner ======
The IRLearner is a compact USB device for learning IR codes and testing them via the on-board IR blaster output. It can also be used to test codes from our IR database.
===== Quick Reference Guide =====
The IRLearnerQuick Reference Guide provides the basic information required to get started on a printable, black and white document that can be easily taken with you to a job site. [[http://www.commandfusion.com/hardware/irlearner#downloads|Find the IRLearnerQuick Reference Guide here.]]
===== CFLink Protocol =====
For details on the CFLink protocol supported by the IRLearner, see the [[hardware:cflink:ir-learner|IRLearner CFLink Protocol page]].
===== Software =====
The CommandFusion USB IRlearner requires the Windows IRLearner Software to be installed.\\
\\
[[http://www.commandfusion.com/irlearner.html#downloads|Download the CommandFusion IRLearner Software here.]]
===== IRLearnerQuickStartGuide =====
The IRLearnerQuickStartGuide is available [[hardware:quick-start:ir-learner|here.]]
t the LAN bridge will [[software:system-commander:quick-start-guide:quick-start-page-2#automatic-id-conflict-resolution|automatic... ou wish to send the IR data in.
* STR - Send an IR code in CommandFusion's proprietary format. e.e. from the our IRlearner software.
* RAW - Send an IR code in raw hex format, eg. CCF codes.
* DBA - Send an IR command from the internal database.
* MEM - Send a learned IR code that is stored o
and test commands contained in the IR files.
An IR file is created through our [[software:ir-learner|IRLearner software.]]
===== 1 - Add/Remove Buttons =====
Use these buttons to either upload an IR file to... ice'' saves any changes made to the device
===== IR File Management Video Guide =====
[[http://www.youtube.com/watch?feature=player_detailpage&v=w-UwmiZx1cU#t=1092s|This topic is covered in our System Commander QuickStart Video.]]
and test commands contained in the IR files.
An IR file is created through our [[software:ir-learner|IRLearner software.]]
===== 1 - Add/Remove Buttons =====
Use these buttons to either upload an IR file to... ice'' saves any changes made to the device
===== IR File Management Video Guide =====
[[http://www.youtube.com/watch?feature=player_detailpage&v=w-UwmiZx1cU#t=1092s|This topic is covered in our System Commander QuickStart Video.]]
hardware out of the box.\\
\\
A System Commander QuickStartGuide is [[software:system-commander:quick-start-guide|available in both video and text format her... mands, and program rules and scheduling.
===== QuickStartGuide =====
For instructions on how to get started with... ion Hardware, see our [[software:system-commander:quick-start-guide|System Commander QuickStartGuide.]]
===== Known Issues =====
None at this time.
... 16|SW16]] - Button panel interface
* [[hardware:ir-learner|IRLearner]] - USB Infrared learner
* [[hardware:modules:mod-hry2|MOD-HRY2]] - Rela
====== IRLearnerQuickStartGuide ======
The [[hardware:quick-start:ir-learner|IRLearnerQuickStartGuide]] is located under the hardware section. [[hardware:quick-start:ir-learner|You can find it here.]]
esigner]]
- [[software:gui-designer:guidesigner-quick-start-guide|guiDesigner/iViewer QuickStartGuide]] - a quickstartguide to help get you started with iViewer and guiDesigner
- [[software:gui-designer:release-note
====== Guides/Tutorials - Hardware ======
Listed below are shortcuts to the quickstart guides for CommandFusion hardware.\\
\\
These guides are designed to teach you the basics of using CommandFusion hardware.
[[hardware:quick-start:ir-learner|IRLearnerQuickStartGuide]]\\
[[software:system-commander:quick-start-guide|System Commander / Hardware Configuration QuickStartGuide]]
ewer. See our [[software:gui-designer:guidesigner-quick-start-guide|guiDesigner/iViewer QuickStartGuide]] if you are not familiar with our software yet.
... ds/|iLearn software]] (if you have a Global Cache IRLearner). Or use their [[http://www.globalcache.com/downl... t software]] to convert hex (CCF) to Global Cache IR format.
==== Serial Commands ====
All serial da