This shows you the differences between two versions of the page.
hardware:ir-blaster [2012/10/15 01:39] aaron |
hardware:ir-blaster [2016/06/28 23:22] (current) jarrod [IN 2] |
||
---|---|---|---|
Line 2: | Line 2: | ||
The CommandFusion IR Blaster is a multi-function IR device, capable of both sending and receiving IR signals.\\ | The CommandFusion IR Blaster is a multi-function IR device, capable of both sending and receiving IR signals.\\ | ||
Using the IR receivers (on-board or via an external receiver input) you can trigger rules within the CFLink network, essentially using macros to control anything within the CFLink network. | Using the IR receivers (on-board or via an external receiver input) you can trigger rules within the CFLink network, essentially using macros to control anything within the CFLink network. | ||
+ | |||
+ | ===== Quick Reference Guide ===== | ||
+ | |||
+ | The IR Blaster Quick Reference Guide provides the basic information required to get started on a printable, black and white document that can be easily taken with you to a job site. [[http://www.commandfusion.com/irblaster.html#downloads|Find the IR Blaster Quick Reference Guide here.]] | ||
+ | |||
+ | ===== IR Rules ===== | ||
+ | The IR Blaster can be used to recognize incoming IR codes, then trigger a macro of actions on the CFLink bus or on the IR Blaster itself, such as transmit another IR code from the internal blasters. We call this feature ‘IR Rules’. | ||
+ | |||
+ | [[hardware:quick-start:ir-blaster-ir-rules|See the IR Rules guide to see how to implement or to learn more about this feature.]] | ||
===== Information Panel ===== | ===== Information Panel ===== | ||
Line 41: | Line 50: | ||
=== Pinout === | === Pinout === | ||
- | - Data + | + | - Tip = IR+ |
- | - Data - | + | - Sleeve = IR- |
==== IN 2 ==== | ==== IN 2 ==== | ||
- | An external IR Receiver can be plugged in via the second 3.5mm mono jack. | + | An external IR Receiver can be plugged in via the second 3.5mm jack.\\ |
+ | You can use an IR receiver module such as the following one from Vishay:\\ | ||
+ | TSOP4838 - http://www.vishay.com/docs/82459/tsop48.pdf\\ | ||
+ | There is no receiver shipped with the unit. | ||
=== Pinout === | === Pinout === | ||
- | - Data + | + | - Tip = IR Receiver Output (Signal) |
- | - Data - | + | - Ring = Vcc (3.3V) |
+ | - Sleeve = Ground | ||
+ | {{ :hardware:ir_receiver.svg |}} | ||
==== CFLink ==== | ==== CFLink ==== | ||
The 5-pin CFLink connector is used to communicate with other CFLink devices on the network. | The 5-pin CFLink connector is used to communicate with other CFLink devices on the network. |