CommandFusion Wiki

Documentation Resources

User Tools

Site Tools


hardware:getting-started

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

hardware:getting-started [2013/05/03 00:05]
aaron [Configuration]
hardware:getting-started [2013/05/03 00:09] (current)
aaron [Configuration]
Line 15: Line 15:
  
 ===== Configuration ===== ===== Configuration =====
- +Please ensure you have updated to the latest firmware as described above before configuring your hardware.
-Once the hardware has been updated to the latest firmware, you can use the [[http://​www.commandfusion.com/​systemcommander.html|System Commander]] software to configure the devices properties ​as required, send test commands, and program rules and scheduling. +
- +
-If you are using iViewer to control CommandFusion hardware, you can use our guiDesigner plugin [[software:​gui-designer:​cflink-builder|"​CFLink Command Builder"​]] to easily setup control of the hardware ​via guiDesigner.\\+
  
 System Commander can discover and configure devices over Ethernet (if you are using a LAN Bridge) or RS232 for any device with an on-board RS232 port.\\ System Commander can discover and configure devices over Ethernet (if you are using a LAN Bridge) or RS232 for any device with an on-board RS232 port.\\
 \\ \\
 [[http://​www.commandfusion.com/​systemcommander.html|Download System Commander Here.]] [[http://​www.commandfusion.com/​systemcommander.html|Download System Commander Here.]]
-\\ + 
-\\+==== Configuration - When Controlling Via iViewer ==== 
 +If you are using iViewer to control CommandFusion hardware, you can use our guiDesigner plugin [[software:​gui-designer:​cflink-builder|"​CFLink Command Builder"​]] to easily setup control of the hardware via guiDesigner.\\ 
 + 
 +==== Configuration - When Not Controlling Via iViewer ==== 
 +Use the [[http://​www.commandfusion.com/​systemcommander.html|System Commander]] software to configure the devices properties as required, send test commands, and program rules and scheduling. 
 + 
 + 
 ===== Quick Start Guide ===== ===== Quick Start Guide =====
 For instructions on how to get started with System Commander and CommandFusion Hardware, see our [[software:​system-commander:​quick-start-guide|System Commander Quick Start Guide.]] For instructions on how to get started with System Commander and CommandFusion Hardware, see our [[software:​system-commander:​quick-start-guide|System Commander Quick Start Guide.]]
hardware/getting-started.1367539549.txt.gz · Last modified: 2013/05/03 00:05 by aaron