User Tools
hardware:getting-started
Differences
This shows you the differences between two versions of the page.
|
hardware:getting-started [2013/01/03 04:47] aaron [Getting Started] |
hardware:getting-started [2013/05/03 00:09] (current) aaron [Configuration] |
||
|---|---|---|---|
| Line 15: | Line 15: | ||
| ===== Configuration ===== | ===== Configuration ===== | ||
| + | Please ensure you have updated to the latest firmware as described above before configuring your hardware. | ||
| - | Once the hardware has been updated to the latest firmware, you can use the [[http://www.commandfusion.com/systemcommander.html|System Commander]] software to configure the devices properties as required, send test commands, and program rules and scheduling.\\ | ||
| - | \\ | ||
| System Commander can discover and configure devices over Ethernet (if you are using a LAN Bridge) or RS232 for any device with an on-board RS232 port.\\ | System Commander can discover and configure devices over Ethernet (if you are using a LAN Bridge) or RS232 for any device with an on-board RS232 port.\\ | ||
| \\ | \\ | ||
| [[http://www.commandfusion.com/systemcommander.html|Download System Commander Here.]] | [[http://www.commandfusion.com/systemcommander.html|Download System Commander Here.]] | ||
| + | |||
| + | ==== Configuration - When Controlling Via iViewer ==== | ||
| + | If you are using iViewer to control CommandFusion hardware, you can use our guiDesigner plugin [[software:gui-designer:cflink-builder|"CFLink Command Builder"]] to easily setup control of the hardware via guiDesigner.\\ | ||
| + | |||
| + | ==== Configuration - When Not Controlling Via iViewer ==== | ||
| + | Use the [[http://www.commandfusion.com/systemcommander.html|System Commander]] software to configure the devices properties as required, send test commands, and program rules and scheduling. | ||
| + | |||
| + | |||
| + | |||
| + | ===== Quick Start Guide ===== | ||
| + | For instructions on how to get started with System Commander and CommandFusion Hardware, see our [[software:system-commander:quick-start-guide|System Commander Quick Start Guide.]] | ||
| ===== Known Issues ===== | ===== Known Issues ===== | ||
hardware/getting-started.1357188428.txt.gz ยท Last modified: 2013/01/03 04:47 by aaron
