CommandFusion Wiki

Documentation Resources

User Tools

Site Tools


hardware:getting-started

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

hardware:getting-started [2012/10/12 00:24]
jarrod [Model Specific Information]
hardware:getting-started [2013/05/03 00:09] (current)
aaron [Configuration]
Line 1: Line 1:
 ====== Getting Started ====== ====== Getting Started ======
  
-This documentation is for new users of CommandFusion hardware. It will serve as a guide to getting started with your hardware out of the box. +This documentation is for new users of CommandFusion hardware. It will serve as a guide to getting started with your hardware out of the box.\\ 
 +\\ 
 +A System Commander Quick Start Guide is [[software:​system-commander:​quick-start-guide|available in both video and text format here.]]
 ===== First Steps ===== ===== First Steps =====
  
Line 14: Line 15:
  
 ===== Configuration ===== ===== Configuration =====
 +Please ensure you have updated to the latest firmware as described above before configuring your hardware.
  
-Once the hardware has been updated to the latest firmware, you can use the System Commander software to configure the devices properties as required, send test commands, and program rules and scheduling.\\ 
-\\ 
 System Commander can discover and configure devices over Ethernet (if you are using a LAN Bridge) or RS232 for any device with an on-board RS232 port.\\ System Commander can discover and configure devices over Ethernet (if you are using a LAN Bridge) or RS232 for any device with an on-board RS232 port.\\
 \\ \\
 [[http://​www.commandfusion.com/​systemcommander.html|Download System Commander Here.]] [[http://​www.commandfusion.com/​systemcommander.html|Download System Commander Here.]]
  
-===== Known Issues =====+==== Configuration - When Controlling Via iViewer ​==== 
 +If you are using iViewer to control CommandFusion hardware, you can use our guiDesigner plugin [[software:​gui-designer:​cflink-builder|"​CFLink Command Builder"​]] to easily setup control of the hardware via guiDesigner.\\
  
-Currently scheduling on LAN Bridge is not yet fully functionalWe are working on some updates to System Commander software to rectify this\\ +==== Configuration - When Not Controlling Via iViewer ==== 
-The problem is only relating ​to the software, so the current LAN Bridge hardware ​and firmware is working as intendedsoftware ​update is currently being developed to implement scheduling functionality.+Use the [[http://​www.commandfusion.com/​systemcommander.html|System Commander]] software to configure the devices properties as required, send test commands, and program rules and scheduling
 + 
 + 
 + 
 +===== Quick Start Guide ===== 
 +For instructions on how to get started with System Commander ​and CommandFusion Hardwaresee our [[software:​system-commander:​quick-start-guide|System Commander Quick Start Guide.]] 
 + 
 +===== Known Issues ===== 
 +None at this time.
  
 ===== Model Specific Information ===== ===== Model Specific Information =====
hardware/getting-started.1350001489.txt.gz · Last modified: 2012/10/12 00:24 by jarrod