This shows you the differences between two versions of the page.
hardware:getting-started [2012/10/12 00:26] jarrod [Configuration] |
hardware:getting-started [2013/05/03 00:09] (current) aaron [Configuration] |
||
---|---|---|---|
Line 1: | Line 1: | ||
====== Getting Started ====== | ====== Getting Started ====== | ||
- | This documentation is for new users of CommandFusion hardware. It will serve as a guide to getting started with your hardware out of the box. | + | This documentation is for new users of CommandFusion hardware. It will serve as a guide to getting started with your hardware out of the box.\\ |
+ | \\ | ||
+ | A System Commander Quick Start Guide is [[software:system-commander:quick-start-guide|available in both video and text format here.]] | ||
===== First Steps ===== | ===== First Steps ===== | ||
Line 14: | Line 15: | ||
===== Configuration ===== | ===== Configuration ===== | ||
+ | Please ensure you have updated to the latest firmware as described above before configuring your hardware. | ||
- | Once the hardware has been updated to the latest firmware, you can use the [[http://www.commandfusion.com/systemcommander.html|System Commander]] software to configure the devices properties as required, send test commands, and program rules and scheduling.\\ | ||
- | \\ | ||
System Commander can discover and configure devices over Ethernet (if you are using a LAN Bridge) or RS232 for any device with an on-board RS232 port.\\ | System Commander can discover and configure devices over Ethernet (if you are using a LAN Bridge) or RS232 for any device with an on-board RS232 port.\\ | ||
\\ | \\ | ||
[[http://www.commandfusion.com/systemcommander.html|Download System Commander Here.]] | [[http://www.commandfusion.com/systemcommander.html|Download System Commander Here.]] | ||
- | ===== Known Issues ===== | + | ==== Configuration - When Controlling Via iViewer ==== |
+ | If you are using iViewer to control CommandFusion hardware, you can use our guiDesigner plugin [[software:gui-designer:cflink-builder|"CFLink Command Builder"]] to easily setup control of the hardware via guiDesigner.\\ | ||
- | Currently scheduling on LAN Bridge is not yet fully functional. We are working on some updates to System Commander software to rectify this. \\ | + | ==== Configuration - When Not Controlling Via iViewer ==== |
- | The problem is only relating to the software, so the current LAN Bridge hardware and firmware is working as intended, a software update is currently being developed to implement scheduling functionality. | + | Use the [[http://www.commandfusion.com/systemcommander.html|System Commander]] software to configure the devices properties as required, send test commands, and program rules and scheduling. |
+ | |||
+ | |||
+ | |||
+ | ===== Quick Start Guide ===== | ||
+ | For instructions on how to get started with System Commander and CommandFusion Hardware, see our [[software:system-commander:quick-start-guide|System Commander Quick Start Guide.]] | ||
+ | |||
+ | ===== Known Issues ===== | ||
+ | None at this time. | ||
===== Model Specific Information ===== | ===== Model Specific Information ===== |