CommandFusion Wiki

Documentation Resources

User Tools

Site Tools


hardware:firmware-update

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

hardware:firmware-update [2013/09/10 05:27]
jarrod [Troubleshooting]
hardware:firmware-update [2013/11/22 04:19] (current)
jarrod [Troubleshooting]
Line 94: Line 94:
   - Delete the downloaded firmware from your PC and re-download then try again. Firmware can be found in the ''​%appdata%\CommandFusion\SystemCommander\firmware''​ folder (paste that into windows explorer address bar).   - Delete the downloaded firmware from your PC and re-download then try again. Firmware can be found in the ''​%appdata%\CommandFusion\SystemCommander\firmware''​ folder (paste that into windows explorer address bar).
   - Try updating the firmware over RS232 if possible - you can get a cheap USB-RS232 adaptor from Ebay if your PC does not have an on-board serial port.   - Try updating the firmware over RS232 if possible - you can get a cheap USB-RS232 adaptor from Ebay if your PC does not have an on-board serial port.
 +  - You can manually get the firmware from our servers here: https://​github.com/​commandFusion/​getfirmware
  
 If these all fail, then contact us through our [[http://​www.commandfusion.com/​support|support page.]] If these all fail, then contact us through our [[http://​www.commandfusion.com/​support|support page.]]
hardware/firmware-update.txt ยท Last modified: 2013/11/22 04:19 by jarrod