CommandFusion Wiki

Documentation Resources

User Tools

Site Tools


hardware:cflink:rules

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

hardware:cflink:rules [2014/01/13 05:03]
jarrod
hardware:cflink:rules [2014/01/13 05:04] (current)
jarrod
Line 1: Line 1:
-====== Rules (Event Triggering) ======+====== Rules CFLink Protocol ​(Event Triggering) ======
  
-===== Overview =====+===== Rules Overview =====
  
 Rules allow each device on the CFLink network to perform actions based on string matching of outgoing data on the CFLink bus.\\ Rules allow each device on the CFLink network to perform actions based on string matching of outgoing data on the CFLink bus.\\
Line 8: Line 8:
 For more details on how to configure rules, please see our [[hardware:​rules|general rules tab entry]] on our wiki. For more details on how to configure rules, please see our [[hardware:​rules|general rules tab entry]] on our wiki.
  
-===== Rules Protocol =====+===== Rules CFLink ​Protocol =====
  
 Due to the storage requirements on CFLink devices, all rules on a device must be transfered in one process. Single rules cannot be added/​edited/​removed without sending all other rule information stored on the device at the same time. This means there are only three CFLink messages used to manipulate rules on a device, Write, Read and Delete. Due to the storage requirements on CFLink devices, all rules on a device must be transfered in one process. Single rules cannot be added/​edited/​removed without sending all other rule information stored on the device at the same time. This means there are only three CFLink messages used to manipulate rules on a device, Write, Read and Delete.
hardware/cflink/rules.1389589425.txt.gz ยท Last modified: 2014/01/13 05:03 by jarrod