CommandFusion Wiki

Documentation Resources

User Tools

Site Tools


hardware:cflink:error-codes

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

hardware:cflink:error-codes [2015/06/02 03:18]
jarrod
hardware:cflink:error-codes [2021/05/16 23:58] (current)
jarrod [100 - 199: LAN Bridge & Solo Error Codes]
Line 24: Line 24:
   * 016 = Memory empty   * 016 = Memory empty
   * 017 = Invalid checksum   * 017 = Invalid checksum
-  ​* 018 = Invalid IPv4 address +  * 019 = Another HTTP Request is still in progress.
-  ​* 019 = Invalid Gateway+
  
 ==== Rules Engine Errors ==== ==== Rules Engine Errors ====
Line 76: Line 75:
   * 083 = ''​SPW''​ Command, but not in 232 Mode   * 083 = ''​SPW''​ Command, but not in 232 Mode
  
-===== 100 - 199: LAN Bridge Error Codes =====+===== 100 - 199: LAN Bridge ​& Solo Error Codes =====
  
   * 100 = Invalid IP Address   * 100 = Invalid IP Address
Line 112: Line 111:
   * 132 = Slot 2 is not subscribed to Slot 1   * 132 = Slot 2 is not subscribed to Slot 1
   * 133 = ''​SND''​ Command Invalid Packet   * 133 = ''​SND''​ Command Invalid Packet
 +  * 134 = Invalid authentication. Must login using CLANPWD command on first connection.
 +  * 151 = ''​RUN''​ command macro name could not be found.
 +  * 153 = Network slot configured as UDP socket, but data could not be sent to the network. Check network settings.
 +  * 154 = Network slot configured as TCP Client, but was not connected to a TCP Server. Data could not be sent.
 +  * 155 = Network slot is disabled. Data cannot be sent on this slot.
 +  * 157 = Network Bridging configuration is invalid - too many sockets are required. Check network slot configurations.
  
 ===== 200 - 224: CFMini Error Codes ===== ===== 200 - 224: CFMini Error Codes =====
hardware/cflink/error-codes.1433215104.txt.gz · Last modified: 2015/06/02 03:18 by jarrod