This shows you the differences between two versions of the page.
hardware:cflink:default-cflink-ids [2012/08/10 04:47] aaron created |
hardware:cflink:default-cflink-ids [2015/07/02 01:54] (current) jarrod |
||
---|---|---|---|
Line 5: | Line 5: | ||
* [02] - [0F] = Ethernet Devices | * [02] - [0F] = Ethernet Devices | ||
- | * '' [02] '' = LANBridge | + | * ''[02]'' = LAN Bridge |
+ | * ''[03]'' = Solo | ||
* [10] - [1F] = Modular Devices | * [10] - [1F] = Modular Devices | ||
- | * '' [10] '' = MOD4 | + | * ''[10]'' = MOD4 |
- | * '' [11] '' = DIN-MOD4 | + | * ''[11]'' = DIN-MOD4 |
* [20] - [2F] = Standalone Devices | * [20] - [2F] = Standalone Devices | ||
- | * '' [20] '' = CFMini | + | * ''[20]'' = CFMini |
- | * '' [21] '' = IRBlaster | + | * ''[21]'' = IRBlaster |
- | * '' [22] '' = SW16 | + | * ''[22]'' = SW16 |
- | Note: ID's are represented in hex format, so [20] = hex byte 0x20, which equals decimal ID value of 32. | + | \\ |
+ | **Note:** ID's are represented in hex format, so [20] = hex byte 0x20, which equals decimal ID value of 32. | ||
Throughout the protocol all CFLink ID's are referred to in hex format (or ascii representation of hex). The decimal value is not needed anywhere in the protocol. | Throughout the protocol all CFLink ID's are referred to in hex format (or ascii representation of hex). The decimal value is not needed anywhere in the protocol. |