CommandFusion Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Default CFLink IDs ======
The following documentation outlines the default CFLink ID's for the current CommandFusion hardware.\\
These are the ID's that each product ships with out of the factory.\\
You can of course change this ID later, as each product on the CFLink bus must have a unique CFLink ID.\\

  * [02] - [0F] = Ethernet Devices
    * ''[02]'' = LAN Bridge
    * ''[03]'' = Solo
  * [10] - [1F] = Modular Devices
    * ''[10]'' = MOD4
    * ''[11]'' = DIN-MOD4
  * [20] - [2F] = Standalone Devices
    * ''[20]'' = CFMini
    * ''[21]'' = IRBlaster
    * ''[22]'' = SW16
\\ 
**Note:** ID's are represented in hex format, so [20] = hex byte 0x20, which equals decimal ID value of 32.
Throughout the protocol all CFLink ID's are referred to in hex format (or ascii representation of hex). The decimal value is not needed anywhere in the protocol.

CommandFusion Wiki

User Tools

Site Tools

Page Tools