User Tools
hardware:cf-mini
Differences
This shows you the differences between two versions of the page.
|
hardware:cf-mini [2012/08/03 03:36] jarrod |
hardware:cf-mini [2013/10/25 05:27] (current) jarrod |
||
|---|---|---|---|
| Line 8: | Line 8: | ||
| * 1 x CFLink | * 1 x CFLink | ||
| * 1 x MicroSD Slot | * 1 x MicroSD Slot | ||
| + | |||
| + | ===== Quick Reference Guide ===== | ||
| + | |||
| + | The CF Mini Quick Reference Guide provides the basic information required to get started on a printable, black and white document that can be easily taken with you to a job site. [[http://www.commandfusion.com/cfmini.html#downloads|Find the CF Mini Quick Reference Guide here.]] | ||
| + | ===== CFLink Protocol ===== | ||
| + | For details on the CFLink protocol supported by the CF Mini, see the [[hardware:cflink:cf-mini-cflink-protocol|CF Mini CFLink Protocol page]]. | ||
| ===== Information Panel ===== | ===== Information Panel ===== | ||
| Line 30: | Line 36: | ||
| * For example, it could represent a relay being closed, reading voltage changes, sending IR, etc. | * For example, it could represent a relay being closed, reading voltage changes, sending IR, etc. | ||
| - | ==== Pinhole Buttons ==== | + | ==== Recessed Buttons ==== |
| * Setup | * Setup | ||
| * Press to toggle on-board RS232 Mode | * Press to toggle on-board RS232 Mode | ||
| * Reset | * Reset | ||
| - | * Press to reset the unit. See the [Device Resetting](reset.html) page for more information. | + | * Press to reset the unit. See the [[hardware:device-resetting|Device Resetting]] page for more information. |
| ===== Ports ===== | ===== Ports ===== | ||
| Line 45: | Line 51: | ||
| * Resistance Reading Input (0 to 10,000 Ohms in 100 Ohm increments) | * Resistance Reading Input (0 to 10,000 Ohms in 100 Ohm increments) | ||
| * Voltage Reading Input (00.0 to 10.0 Volts DC in 0.1 Volt increments) | * Voltage Reading Input (00.0 to 10.0 Volts DC in 0.1 Volt increments) | ||
| + | * Voltage Sensing Input (with adjustable thresholds) | ||
| + | * Video Sensing Input (with adjustable thresholds) | ||
| * External Relay Output, 0-24V DC (external power supply required) | * External Relay Output, 0-24V DC (external power supply required) | ||
| - | * LED Output (1mA) | + | * LED Output (5V DC, 1mA) |
| === Pinout === | === Pinout === | ||
| * Top Row | * Top Row | ||
| - | - Port 1 + | + | - Port 1 Input |
| - | - Port 1 - | + | - Port 1 Ground |
| - | - Port 2 + | + | - Port 2 Input |
| - | - Port 2 - | + | - Port 2 Ground |
| * Bottom Row | * Bottom Row | ||
| - | - Port 3 + | + | - Port 3 Input |
| - | - Port 3 - | + | - Port 3 Ground |
| - | - Port 4 + | + | - Port 4 Input |
| - | - Port 4 - | + | - Port 4 Ground |
| + | |||
| + | {{:hardware:io_externalrelay.svg|}} | ||
| ==== Relay ==== | ==== Relay ==== | ||
| Line 109: | Line 119: | ||
| If you are using a custom RJ12 cable, then these colors may not match. So check the socket & cable pinouts to relate to your wiring colors. | If you are using a custom RJ12 cable, then these colors may not match. So check the socket & cable pinouts to relate to your wiring colors. | ||
| - |  | + | {{ :rs232_pinout.png?nolink |}} |
| - GND | - GND | ||
| Line 126: | Line 136: | ||
| If you are using a custom RJ12 cable, then these colors may not match. So check the socket & cable pinouts to relate to your wiring colors. | If you are using a custom RJ12 cable, then these colors may not match. So check the socket & cable pinouts to relate to your wiring colors. | ||
| - |  | + | {{ :rs232-adapter-pinouts.svg?nolink |}} |
| - |  | + | {{ :rj12-adapters.png?nolink |}} |
| ==== CFLink ==== | ==== CFLink ==== | ||
| Line 137: | Line 147: | ||
| - Data + | - Data + | ||
| - Data - | - Data - | ||
| - | - Power (12-24V DC) | + | - Power (9-30V DC) |
| - Ground | - Ground | ||
| Line 149: | Line 159: | ||
| - RJ12 to DB9 female adapter | - RJ12 to DB9 female adapter | ||
| - RJ12 cable, 1 meter. | - RJ12 cable, 1 meter. | ||
| + | |||
| + | ===== Factory Reset ===== | ||
| + | For information on how to rest your device to factory settings, see the [[hardware:device-resetting|Device Resetting Page]]. | ||
| + | |||
| + | {{tag>hardware cf_mini cflink ir io relay rs232 serial com}} | ||
hardware/cf-mini.1343964988.txt.gz · Last modified: 2012/08/03 03:36 by jarrod
