====== CARD-CFLINK ======
This card adds [[hardware:cflink:|CFLink bus]] bus connectivity to the [[hardware:solo|Solo controller]].\\
The Solo can then communicate with other CommandFusion hardware devices on the [[hardware:cflink:|CFLink bus]].\\
Pins 4 and 5 on the connector can be used to power the Solo from the CFLink bus. [[hardware:cflink:cflink-wiring-examples|See the wiring examples]].

====== Pinout ======
The card is supplied with a 5-pin screw terminal connector, with the following pinout (left to right):
  - Data Ground
  - Data +
  - Data -
  - DC + (9-30V DC)
  - DC - (9-30V DC)