• skip to content

CommandFusion Wiki

Documentation Resources

User Tools

  • Login

Site Tools

  • Recent changes
  • Media Manager
  • Sitemap
Trace:

cfmini-cflink-protocol
The page (cfmini-cflink-protocol) doesn't exist. You have been redirected automatically to the search engine.
This message was fired by 404Manager Plugin.

Search

You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate tool.

Results

...
Common Device Protocol: 46 Hits
==== Common Device Protocol ====== The following CFLink protocol messages are common to all CFLink devices. =====... cation settings for the on-board serial port of a CFMini on CFLink ID [05] > [F2][05][F3]QMINTGT[F4][F5][F5] // Repl... rd serial port and dry contact input of a MOD4 on CFLink ID [03] > [F2][03][F3]QMODTGT[F4][F5][F5] // Repl... he ''DID'' (Device ID) command is used to set the CFLink ID of a specific device. === Data === The data
On-Board RS232 Port Protocol: 37 Hits
2 Port Protocol ====== This document defines the CFLink protocol for working with the on-board serial port found o... Send a command out the on-board serial port of a CFMini on CFLink ID [03] > [F2][03][F3]TMINSPW[F4]Hello World!\x0D... turn is received on the on-board serial port of a CFMini on CFLink ID [03]. // The CFMini is configured to send incoming RS232 data to CFLink ID's [02], [04] and [07] < [F2][02][F3]RMINSPR[F4]Hello World!\x
CF Mini: 24 Hits
d the CF Mini Quick Reference Guide here.]] ===== CFLink Protocol ===== For details on the CFLink protocol supported by the CF Mini, see the [[hardware:cflink:cf-mini-cflink-protocol|CF Mini CFLink Protocol page]]. ===== Information Panel ===== The inform... ware missing * Solid = Power on and ready * CFLink Fault (Red) * Solid = Fault discovered on CFLink bus. Remain solid until reset. * Reset unit to clear CFLink fault flag and turn off LED. *
Error Codes: 10 Hits
document outlines all error codes reported by the CFLink protocol. ===== 001 - 074: Common Error Codes ===== The ... Rule definitions. * 001 = Does not comply with CFLink format * 002 = Command not recognised * 003 =... = Invalid Payload Field * 006 = Invalid ''TGT'' CFLink ID * 007 = Duplicate ''TGT'' CFLink ID Defined * 008 = ''TGT'' CFLink ID is local CFLink ID * 009 = ''DID'' Invalid CFLink ID * 010 = ''DID''
Default CFLink IDs: 8 Hits
ich equals decimal ID value of 32. Throughout the protocol all CFLink ID's are referred to in hex format (or ascii representation of hex). The decimal value is not needed anywhere in the protocol.

Page Tools

  • Show pagesource
  • Old revisions
  • Backlinks
  • Back to top
  • Export PDF
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki